In all likelihood, some of the walls in your home have had moisture problems at some point. This inconvenience manifests itself through blistering and peeling of the paint in the affected area. Why is this happening? When it comes to concrete, we must understand that cracks and pores are part of its own nature and the only thing water requires is a small opening to find its path and pass from one side to the other. Therefore, a moisture problem - whether it comes from the exterior floor, the roof or parapet of the residence or from a broken pipe within the concrete - will sooner or later penetrate the width of the wall until it appears on the painted surface.

Paint company Enco has launched Resist 3-in-1 water-repellent paint, the latest member of Enco's Primeless Premium Collection, which consists of the original Primeless 2-in-1, zero-VOC and low-VOC paint. Primeless Zero odor and the new Resist 3 in 1.

Resist 3 in 1 is a paint, sealant and primer in one, which has been specially formulated to solve humidity problems in our walls.

But first, let's examine what are the most common triggers for humidity in walls:

1. Planters adjacent to a wall: If part of the exterior wall is covered by soil and it was not waterproofed with a hydro-repellent membrane, it is very likely that at some point you will face humidity problems on the surface of your walls. To solve this situation, try to remove the soil in the part where the problem occurs and apply a waterproofing membrane on the exterior wall. Then paint the walls with Enco Resist 3 in 1 water-repellent paint.
2. Leaks from the roof or parapet: Moisture may be coming from cracks or cold joints in your roof or parapet. If this is the case, apply a roofing primer such as Enco Hydro Primer, repair the cracks with an elastomeric filler, such as Enco Crack Filler Pro, and apply two thick coats of elastomeric sealant, such as Enco Fiber Seal XP. on the entire surface of your roof, including the parapet. Then proceed to paint the walls with Enco Resist 3 in 1. Remember that the ceiling or lower part of the ceiling must always be painted with a matte acrylic paint, which allows the ceiling to breathe any moisture present in it. Never paint the ceiling with semi-gloss paint or hydrophobic elastomeric paint, as these will encapsulate the moisture present in the ceiling causing moisture to subsequently occur somewhere on the ceiling or walls.
3. Leaks from broken pipes or clogged drains: Another common problem is leaks from broken pipes or clogged drains (example: air conditioners). In this case, it is essential to hire the services of a certified plumber to identify where the problem is and correct it, since if it is not corrected, the risk of the humidity problem getting worse is latent. Once the problem is corrected, apply Enco Resist 3 in 1.

More about Enco Resist 3 in 1 paint

Resist 3 in 1 has a 20-year limited warranty and is proven to resist up to 12 psi of hydrostatic water pressure in laboratory tests. Resist 3 in 1 meets American Society for Testing and Materials standards ASTM D-7705 for alkalinity resistance, ASTM D-7072 for efflorescence resistance, and ASTM D-3273 for fungal resistance. and mold. Therefore, it is ideal for use on walls in humid geographical areas to prevent fungal growth. Resist 3 in 1 is available in matte and semi-glossy finishes.

As you have seen, humidity problems can be rooted in various construction defects. The next time you have a problem like this, you already know what aspects you should study to detect the root of the problem and solve it once and for all. Enco's Resist 3-in-1 water-repellent paint provides the greatest protection so that any remaining moisture in the structure stays outside your walls.

You can get the Primeless Resist 3 in 1 water-repellent paint and other products from the Enco line at Walmart stores, Sears, Ferreterías Ace de Puerto Rico, Home Decor in Humacao, Ferretería Candelaria in Toa Baja, True Value Soli Home Center in Fajardo, Papo's Commercial in Cayey, Comercial Caraballo in San Juan, or request it at your nearest community hardware store. For more information, go to www.encoprimeless.com , www.encopr.com , facebook.com/encopr or call 787-739-3751 .

Original article: https://construccionelnuevodia.com/noticia/elimina-los-problemas-de-humedad-con-enco-resist-3-en-1/